TOHO Industrial Corp.

Various Application for safety harness

Mar 23, 2021

Full body safety harness is widely used in arborist, power supplies, transmission, telecommunication, high rack, metal construction, scaffolding, wind energy, offshore industry, rope access and rigging, etc.Generally, it can be used for fall arrest, restraint, working positioning and Rescue.

safety harness application

Product Specific Applications:

free fall arrest harness

Personal Fall Arrest: FA Harness may be used to support a MAXIMUM 1 Personal Fall Arrest System (PFAS) for use in Fall Arrest applications. Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs. Maximum free fall is 6‘, or up to 12’ if used in combination with equipment explicitly certified for such use. Maximum free fall for Sternal D-ring is 2’. Applicable D-ring: Dorsal, Sternal.

 



restraint safety harnessRestraint: Energy absorbing lanyard may be used in Restraint applications. Restraint systems prevent workers from reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. No free fall is permitted. Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.


Work Positioning safety harness

Work Positioning: FA Harness may be used in Work Positioning applications. Work Positioning systems allow a worker to be supported while in suspension and work freely with both hands. Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side.

 


Safety Harness for rescueRescue/Confined Space: FA Harness may be used in Rescue/Confined Space applications.Rescue systems function to safely recover a worker from a confined location or after exposed to a fall. There are various configurations of Rescue systems depending on the type of rescue.Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs. No free fall is permitted. Applicable D-rings: Dorsal, Chest, Shoulder Sternal.


Note:For all applications: worker weight capacity range(including all clothing, tools, and equipment) is 130-420 lbs.

China construction harness

construction harness supplier

roof climbing harness

 



goTop