1. Make preparations before homework, change work clothes and rubber-soled shoes.
2. Carefully check whether the working tools are complete (seat board, seat belt, sliding lock, U-shaped buckle, etc.)
3. When laying down the rope, carefully check the safety lanyard and safety rope for unmanned damage or natural wear. If there is, stop laying the rope immediately and report to the person in charge or superior on site in time.
4. Before lowering the rope, carefully check whether the main rope and safety rope are fastened to a safe and firm fixed point, and then lower the rope after confirming the safety.
5. When laying down the rope, the rope laying personnel must first take safety protection measures. It is strictly forbidden to take the rope down without taking safety protection measures.
6. Whether the bolts for fixing the steel wire rope of the seat board are tightened, and whether the steel wire rope of the seat board has been hung in the U-shaped buckle, after checking, there is no problem before putting the rope down.
7. The main rope and the safety lanyard cannot be fixed on the same fixed point. Place cloth under the main rope and safety rope.
8. The main rope and safety rope should all fall to the ground to prevent the two ropes from being entangled.
9. Hook up the slide lock and fasten the seat belt, and fasten the seat belt with the slide lock.
10. Keep your energy and concentration during the operation and always remember the tools you hold in your hands to avoid accidents caused by missing objects.
11. In the process of laying the rope, it is strictly forbidden to play, make loud noises, sing, sleep on the sitting board, look around and other bad behaviors.
