1. The operator should always check all visible parts of the safety lanyard, the part where the steel wire rope is connected to the equipment, the safety lanyard drawn from the fixed end and the rope end fixing device.
2. Inspection cycle: The wire rope of the hanging basket shall be inspected at least twice a month after use, and shall comply with the provisions of 2.4.1 in GB 5972.
3. Inspection position: The entire working length of the safety lanyard must be inspected. At the same time, it must be carefully checked through the pulley or reel. Other contact surfaces and those steel wire rope segments that are wound positively and negatively. The wire rope near the end joint should be checked carefully. And should comply with the provisions of 2.4.2 in GB5972.
4. Inspection of the safety lanyard on the idle equipment: When the equipment has been idle or out of service for more than one month, the safety lanyard shall be thoroughly inspected before the equipment is used.





