Safety Harness Rope rescue Lighting Rope safety Belt Rope

Features:

Durable polyester webbing to withstand use over time

This lanyard comes complete with an integral shock-absorbing pack and safety strap for added fall protection

Meets ANSI, and CSA Standards

Attention & Warning

1. Safety lanyard should be used along with full body safety harness.

2. The maximum length of safety lanyard including attached energy absorber would be 1.5-2 meters. The energy absorber can increase the deceleration distance 1.38 meters. Before using, please make sure that fall space permits using an energy absorber. Linked to point must be higher 6 meters than ground.

3.The energy absorber with lanyard must only be connected to front or back attaching point of full body harness.

1) It is strictly FORBIDDEN to connect the energy absorber with lanyard to the work positioning belt.

2) It is strictly FORBIDDEN to additional element between the energy absorber with lanyard and the structural ancher point.

4.Admissible time of use:

The safety lanyard with or without energy absorber can be used for 5 years, counting from the date of putting the device into operation. After 5 years of usage it must be withdrawn from use and destroyed. The energy absorber must be withdrawn from use immediately and destroyed when it have been used to arrest a fall.

Hot Tags: Safety Harness Rope rescue Lighting Rope safety Belt Rope, China, suppliers, manufacturers, customized, made in China, restraint safety harness, safety harness for rock walls, free fall safety harness, rescue fall arrest harness, safety harness for wind energy, safety harness with dorsal D ring