When working at heights, safety must be the first consideration. In addition to wearing a helmet, safety harness is the most basic safety measures. Safety harness is protective equipment for workers when working at heights to prevent falling casualties. Many people don't pay enough attention to it, and they don't even know the correct way to use safety harness. So how to use safety harness correctly? What should be paid attention to when using safety harness?
How to use your safety harness?
We should pay high attention to the role of safety harness. Countless cases have proved that safety harness is "life-saving harness". However, there are few people who feel that it is troublesome to wear safety harness, and it is inconvenient to work when walking up and down, especially some easy and temporary tasks, and think that "if don't waste time to wear safety harness, the work must have finished." As we know, the accident always happened in an instant, so the safety harness must be fastened according to the regulations when working at heights.
Before use it, we should check whether all parts of the safety harness is intact.
If there is no fixed hanging place for height operations, we can use appropriate strength steel wire ropes or other methods to hang. Do not hang on moving/sharp/unstable objects.
Hang it highly and use it lowly. Which means hanging the safety harness at a high place and people work below it. It can reduce the actual impact distance when a fall occurs, on the contrary, it is used for high but hang lowly. When a fall occurs, the actual impact distance will increase, both people and ropes will suffer to larger impact load, so the safety harness must be used at a high level and used at a low level. And the low hanging but high using is forbid.

The safety harness should be tied to a strong component or object, to prevent swing or collision, rope can not be used in knots, the hook should be hung on the connecting ring.
The protective cover of the safety harness should be kept intact to prevent the rope from being worn. If the protective cover is found to be damaged or detached, it must be replaced before use.
Safety harness is strictly prohibited to be extended and used without authorization. If using 3 meters or longer rope, we must add buffer, and each component shall not be arbitrarily removed.
After using the safety harness, we must pay attention to maintenance and storage. We should check sewn and hook part of the safety harness frequently, it is necessary to check carefully whether the twisted thread is broken or damaged.
The safety harness should be properly kept when not in use. Do not be exposed to high temperature, open flame, strong acid, strong alkali or sharp objects, and should not be kept in a humid warehouse for safekeeping.
Safety harness should be tested once after two years of use. If it is frequently used, we must check the appearance frequently. If abnormalities are found, they must be replaced immediately. Safety harness that have been used or after sampling tested is not allowed to be used again.








