The national standard for safety harness has strict requirements for the use and storage :
(1) the safety belt should be hung higher than the user and we should pay attention to prevent swinging collision. When using long ropes above 3 meters, energy absorber should be added, except for the slings used for self-locking hooks.
(2) Lanyard, fall arrester and self-locking hook can be used in series.
(3) The rope should not be tied and the hook is not allowed to be directly hung on the Lanyard. It should be hung on the connecting ring.
(4) Various parts on the safety harness shall not be removed arbitrarily. When replacing a new rope, be careful to add a noose.
(5) After using for two years, a repeated sampling inspection will be necessary to bulk buyers. Do static load test with the girder belt by stretching 5mm with 2206N tension. We can take a impact test for the hanging safety belt with a 80kg weight free fall test. If the safety belt is not broken, it can continue to be used by replacing a new lanyard .
(6) If the safety harness is frequently used, the appearance should be checked frequently. If any abnormality is found, the new rope should be replaced immediately. The use life of the belt is 3 ~ 5 years. If abnormal, it should be scrapped in advance.







