Buckle Connection Instructions

STEP 1: Ensure straps are not twisted. The loose end of webbing is for adjustment and must always be located on the outside (away from the user)
STEP 2: Pass the buckle with the center bar under the square link. Turn the center bar buckle so that the edges line up with the slots in the square link. Pull the center bar buckle completely through the square link and allow it to fall into place on top of the square link.
STEP 3: Pull loose end of strap to tighten adjustment of the harness. Then slide rigid keeper (on the chest strap only) up to buckle Tuck excess webbing into elastic keeper.







