TOHO Industrial Corp.

Do not place the seat belts when not in use

Dec 03, 2020

In the daily maintenance of automobiles, seat belts are often overlooked. In fact, like other parts, seat belts should be used and maintained. Check the performance of seat belts frequently. If damage is found, replace them in time. All bolts on the floor for fixing the seat belts should be tightened according to the regulations, and sealant should be applied around the screws. When wearing, the waist belt should be placed as low as possible, preferably at the hip, not at the waist, shoulder belt should not be under the arm, should be hung in front of the chest diagonally, do not twist the seat belt, do not Hold the package on your legs or wear thick clothes to avoid misplacement of the seat belt and affect normal functions. Do not let the seat belt press on hard or fragile objects, such as glasses, pens and keys in clothes, and do not let the seat belt rub against sharp edges to avoid damage to the seat belt, and do not let the seat back tilt too much. Otherwise, the seat belt will not be able to retract normally. When no one is in the seat, return the seat belt to the retractor. If the seat belt has been subjected to a strong straightening load during use, the assembly should be replaced even if it is not damaged. Do not continue to use the seat belt. The seat belt must be installed with the seat. Do not disassemble it at will. change. When the seat belt is too dirty, you can use soft soapy water as a cleaning solution and scrub it with a cloth or sponge. Do not use dyes or beautiful whitening agents, otherwise it will corrode the seat belt, and do not scrub with a hard brush, so as not to reduce the tensile strength of the seat belt.

Many drivers were injured by the seat belt because they did not pay attention to the correct use of the seat belt. The main reason for being injured by the seat belt is that when the car brakes or shifts suddenly, due to the restraint of the seat belt, the position of the driver and occupant is relatively fixed. Under the action of inertial force, the head and neck of the driver and occupant are in overdrive. Stretching, which can produce a shearing impact force on the cervical spine. In addition, the driver’s long-term fixed position will cause chronic fatigue damage to the muscles and ligaments of the neck, shoulder and waist. The early stage of injury can manifest as cervical spine failure. Stable symptoms, such as numbness, soreness, pain in the neck, shoulders, arms and back. This kind of injury can also be seen in the thoracic and lumbar segments, manifested as backache and back pain. Due to the traction and stimulation of the vertebral artery and cervical spinal nerve roots, severe cases may have symptoms such as dizziness, headache, sub-tinnitus, blurred vision, and even symptoms. There is a wedge-shaped compression fracture of the vertebral body. In order to prevent the occurrence of the above situation, first of all, avoid high-speed driving on non-highway sections. When starting and stopping, the speed should be gentle to reduce the shearing impact on the spine during braking and shifting. In addition, you should stick to it after work. Perform functional exercises for the neck, shoulders and lower back, such as cervical spine exercises, broadcast exercises, etc., to reduce chronic fatigue damage to muscles and ligaments. Once you find the above symptoms, you should go to the hospital in time.


goTop