Design and ergonomics requirement
1.Lanyards shall be made from smoothly finished materials and shall not have sharp edges or burrs that may cause injury to the user, or that may cut, abrade or otherwise cause damage to the lanyard itself.

2. When checked in accordance with requirement (For lanyards with a length adjustment device, verify by functional, visual and tactile examination that the length of the lanyard may be adjusted.), lanyards with a length adjustment device shall be adjustable.

3. Length adjustment devices shall not allow unintentional opening and shall not allow unintentional change in length.
4. Lanyards with a length adjustment device shall be fitted with an end stop which shall prevent unintentional detachment of the length adjustment device from the lanyard.
5. Connectors incorporated in lanyards shall conform to EN 362.
6. The lanyard length, when measured in accordance with requirement (Attach one end of the sample to a suitable fixture. If the lanyard is adjustable, extend it to its maximum length. Apply a load without shock in the form of a mass of (10 ± 0,1) kg, or a corresponding force, to the other end of the lanyard. Maintain the load described above for (60 ± 15) s. Within 10 s, with the load still applied, measure the lanyard length L between the extremity load bearing points, in metres to the nearest 0,01 m), shall be within ± 5% of the length given on the marking of the lanyard.
material requirement
1 Materials which may come into contact with the skin of a user shall not be known to, or suspected to, adversely affect user hygiene or health, e.g. cause irritating or sensitization effects, during normal use of the lanyard.
2 Fibre ropes, webbing and sewing threads for lanyards shall be made from virgin filament or multifilament synthetic fibres suitable for their intended use. The breaking tenacity of the synthetic fibres shall be known to be at least 0,6 N/tex.
3 Wire ropes for lanyards shall be made from steel. The ferrules of terminations shall be made from ductile metallic material. Wire ropes that are not made from stainless steel shall be galvanized in accordance with ISO 2232.
4 Chains shall conform to the requirements for chains for at least 6 mm chains given in ISO 1835. Egg-shaped or similar end links and all connecting links shall be compatible with the chain in all respects.








